Support/FAQ

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Re: Support/FAQ

Postby Chris Thornham » August 17th, 2013, 4:49 am

Haha! It definitely may include what you mentioned above. Sorry about that.

Best of luck,
Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby pk6526 » August 17th, 2013, 10:48 am

Done! Easier than I feared. The trick seems to be balancing the extension at the top of the wheel so you can get it out of the fairing (rather than the rim side).
pk6526
 
Posts: 6
Joined: August 7th, 2013, 7:15 am

Re: Support/FAQ

Postby Chris Thornham » August 18th, 2013, 5:59 am

Congrats! It's a little time consuming but definitely possible.

Now go enjoy your new wheels!

Take care,
Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby schiffscott » September 1st, 2013, 5:32 am

schiffscott
 
Posts: 1
Joined: August 25th, 2013, 2:58 am

Re: Support/FAQ

Postby Chris Thornham » September 1st, 2013, 2:00 pm

Scott,

Thanks for writing. Dunbar was referring to our FAQ page on our website. There is a link in the footer or you can simply got to . I don't think you will need a spacer with a 9 speed cassette. Shimano designed the spacing to be the same for both 9 and 10 speed cassettes. Finally, when ordering you will select what type of freehub body you would like.

I hope that helps.
Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby tribiker68 » September 3rd, 2013, 6:31 pm

Do the wheels come with rims strips and if not is there a particular brand recommendation? Thanks!
tribiker68
 
Posts: 1
Joined: September 1st, 2013, 9:53 am

Re: Support/FAQ

Postby Chris Thornham » September 3rd, 2013, 9:31 pm

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby Angry Albit » October 26th, 2013, 3:04 pm

Hi guys,

have you had any feedback on running the FLO 90s on a Planet-X Exocet 2? I read through all the threads and also searched the web but other than the list of tight fits you listed at the top I couldn't find much more info on that subject. I am currently using Neuvation R28s with 23mm GP4000s on it - and they fit plenty good, both on the frame and from the brake perspective (my Exocet 2 came with the PX CNC breaks...) - but the rims are only 19mm wide.

I figure with the same 23mm tires the wider FLOs shouldn't be a problem but I felt much better jumping into the next pre-order if you could put my mind at ease...

Thx,
Alex
Angry Albit
 
Posts: 2
Joined: October 19th, 2013, 4:27 pm

Re: Support/FAQ

Postby Chris Thornham » October 26th, 2013, 9:26 pm

Alex,

I don't forsee any issues with the Planet X Exocet 2 frame. If by chance there was a fit issue than we will return the wheels no questions asked as long as they have not been ridden.

I hope that helps. Let me know if you have any additional questions.

Take care,
Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby rmisk » October 29th, 2013, 4:58 pm

Will the Flo 30s fit my 2012 Madone 5.2?
rmisk
 
Posts: 1
Joined: October 28th, 2013, 7:40 pm

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: bhurley and 1 guest