10 spd to 11 spd

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

10 spd to 11 spd

Postby saw777 » February 21st, 2016, 11:24 pm

i purchased a set of Flo wheels a couple of years back, one was a Flo 90 10 spd, wondered if it is possible to change it to an 11 spd ?, as I am upgrading my bike.
Thanks for your advice.
saw777
 
Posts: 1
Joined: February 6th, 2016, 11:58 pm

Re: 10 spd to 11 spd

Postby Chris Thornham » February 22nd, 2016, 8:43 pm

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: 10 spd to 11 spd

Postby ewright » March 13th, 2016, 6:31 pm

I have a 2013 disc with a Shimano/SRAM freehub, so changing the freehub to an 11 spd isn't possible according to your site. Is it possible to send the disc in to replace the old hub with an 11 spd hub? How much would that cost?
ewright
 
Posts: 1
Joined: March 12th, 2016, 1:02 am

Re: 10 spd to 11 spd

Postby Chris Thornham » March 20th, 2016, 10:24 pm

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: 10 spd to 11 spd

Postby crinojr » June 7th, 2016, 1:16 pm

Hi, I have the 2013 FLO 90 wheel and recently upgraded my bike to an 11 speed. I purchased the shimano 11 speed hub and replaced the old 10 speed hub. Unfortunately, the wheel is now "out of dish" and I am getting some rubbing on the left brake pad. Is there a way to fix this other than widening the brakes? thanks.
crinojr
 
Posts: 3
Joined: August 23rd, 2013, 12:58 pm

Re: 10 spd to 11 spd

Postby Chris Thornham » June 8th, 2016, 10:20 am

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest