Flo wheels and water...

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Flo wheels and water...

Postby Nitnellav » December 11th, 2012, 6:04 am

Sorry for this probably very noobish question, but hope you will answer it anyway.

I can't help but notice that the spokes doesn't seem to be fastened to the "fairing"?, but seem to pass through small holes.
Doesn't this mean that water and dirt can enter through these holes and "inside" the wheels?
If so, then how do you clean it out?

Sorry if this seems like a stupid question, but I can't help wondering about this.
Hope to get an answer and no hate. I am still an amateur.

Otherwise your wheels look very slick to me.

Kind regards
Morgan
Nitnellav
 
Posts: 6
Joined: December 3rd, 2012, 5:58 am

Re: Flo wheels and water...

Postby cyberjunkie21 » December 12th, 2012, 4:58 pm

I don't have mine yet, but from what I understand there should be a 'drain' hole that you can line up to remove any water from the wheels while not in use.
cyberjunkie21
 
Posts: 11
Joined: November 19th, 2012, 2:55 pm

Re: Flo wheels and water...

Postby Nitnellav » December 13th, 2012, 3:01 am

Thanks, from studying the product shots, it seems there is indeed a small hole in the fairing.

Any idea why the spokes is not fastened to the fairing like on Zipp wheels?
Nitnellav
 
Posts: 6
Joined: December 3rd, 2012, 5:58 am

Re: Flo wheels and water...

Postby meesier42 » December 15th, 2012, 7:12 pm

on Zipp wheels it is not a fairing it is a structural component of the rim. With the carbon (Firecrest are all carbon) being structural they are able to build the spokes to the inner most section of the carbon,

With FLO, there the aluminum rim is the structural part not the carbon, the carbon is purely an aero shape (fairing) to cheat the wind. Since the carbon is not structural the spokes cannot attach to it as even finger pressure can easily flex it.
meesier42
 
Posts: 2
Joined: December 8th, 2012, 8:50 am

Re: Flo wheels and water...

Postby Nitnellav » December 16th, 2012, 1:36 pm

Thanks for the good answers to my questions!
Nitnellav
 
Posts: 6
Joined: December 3rd, 2012, 5:58 am

Re: Flo wheels and water...

Postby Chris Thornham » December 23rd, 2012, 8:08 pm

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Flo wheels and water...

Postby Nitnellav » December 30th, 2012, 1:00 pm

Thanks Chris,
I'm going to order a 60/90 set for my first tribike (Shiv Comp) which i'm buying jan/feb 2013.
Though you'll probably see me asking a few other questions here and there regarding which cassette to get etc.

Best regards
Nitnellav
 
Posts: 6
Joined: December 3rd, 2012, 5:58 am

Re: Flo wheels and water...

Postby Chris Thornham » December 31st, 2012, 10:27 am

Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Flo wheels and water...

Postby PenguinBoy » November 24th, 2013, 2:52 am

Is there any benefit/dis-benefit to covering the holes?
PenguinBoy
 
Posts: 4
Joined: September 28th, 2013, 6:58 am

Re: Flo wheels and water...

Postby Chris Thornham » November 25th, 2013, 10:16 am

PenguinBoy,

I would not cover the holes. There is no known benefit to doing so. The holes are there to allow enough clearance for the spokes to move small amounts.

Please let me know if you have any additional questions.

Take care,
Chris Thornham
FLO Cycling:
FLO Blog: | Twitter: | Facebook:
Chris Thornham
Site Admin
 
Posts: 588
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest