Stickers

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Stickers

Postby tri-guy » March 26th, 2015, 8:01 pm

What is the best way to change the stickers on a set of 60/90's?
tri-guy
 
Posts: 1
Joined: March 26th, 2015, 5:57 am

Re: Stickers

Postby Chris Thornham » April 1st, 2015, 7:12 am

tri-guy wrote:What is the best way to change the stickers on a set of 60/90's?


Good question.  The slower you remove the stickers the better.  I find more residue will come off this way.  You can also apply heat from a hair dryer to help lift the residue when peeling the stickers off.  

For any remaining glue I like acetone from a hardware store.  The drug store stuff is not strong enough.  Please use it as sparingly as you can and keep it away from the carbon aluminum interface. Also, keep it away from the black anodization on the rim since it may remove some of the black coloring. I hope this helps.

Take care,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 574
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest