Support/FAQ

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Re: Support/FAQ

Postby Chris Thornham » October 31st, 2013, 8:27 pm

rmisk wrote:Will the Flo 30s fit my 2012 Madone 5.2?


Thanks for writing. The FLO 30s should not have any problems fitting on your Trek Madone 5.2. Please let me know if you have any additional questions.

Take care,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby sdankert » January 22nd, 2014, 8:59 am

Powertap Update?

Any new news here? Have you started your work on a powertap solution? I have a nice new PT hub that I'm itching to install in a Flo 90 wheel assembly.

Thanks for the update.

Steve
sdankert
 
Posts: 3
Joined: January 21st, 2014, 1:46 pm
Location: Pewaukee, WI

Re: Support/FAQ

Postby Chris Thornham » January 22nd, 2014, 11:01 am

We are working on a power solution and hope to have updates later this year. We know power is very important and definitely want it to be part of FLO. As soon as we have some news we will update it.

Take care,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby SirHustlerEsq » May 16th, 2014, 2:03 pm

I'm looking to lace my Flo30 hoops to Chris King R45 standard flange hubs using Sapim CX-Ray spokes with a double-cross in rear and radial front (unless you suggest otherwise). This is my first wheel build and I'm not sure what size nipples (12 or 14mm) to use nor spoke length. Do you guys happen to know what spoke length and nipple size to use with these hubs, or will I be one of the first going down this road? I know it's a right of passage to do the math and I should probably just figure it out myself, but I'm scared of burning cash, lol. Thanks for any advice.
SirHustlerEsq
 
Posts: 10
Joined: October 4th, 2013, 5:57 pm

Re: Support/FAQ

Postby Chris Thornham » May 16th, 2014, 2:14 pm

SirHustlerEsq,

These really are all questions for your wheel builder. The build spec, components used, intended use, rider profile etc, will all have to be considered when answering these questions.

Have you discussed these questions with your wheel builder?
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby SirHustlerEsq » May 16th, 2014, 2:42 pm

A friend is going to put them together for me. Don't worry, he's experienced, but we couldn't find any wheel data from the popular wheel-building calculators so we'll have to manually measure everything it seems.
SirHustlerEsq
 
Posts: 10
Joined: October 4th, 2013, 5:57 pm

Re: Support/FAQ

Postby Chris Thornham » May 16th, 2014, 9:33 pm

SirHustlerEsq wrote:A friend is going to put them together for me. Don't worry, he's experienced, but we couldn't find any wheel data from the popular wheel-building calculators so we'll have to manually measure everything it seems.


What wheel data are you looking for?
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby SirHustlerEsq » May 17th, 2014, 9:51 am

Chris Thornham wrote:
SirHustlerEsq wrote:A friend is going to put them together for me. Don't worry, he's experienced, but we couldn't find any wheel data from the popular wheel-building calculators so we'll have to manually measure everything it seems.


What wheel data are you looking for?

ERD so I can attempt to calculate spoke length.
SirHustlerEsq
 
Posts: 10
Joined: October 4th, 2013, 5:57 pm

Re: Support/FAQ

Postby Chris Thornham » May 18th, 2014, 9:22 pm

The ERD on the FLO 30 is 586mm. Here's some other specs should you need them.

http://flocycling.blogspot.com/2014/03/flo-cycling-flo-30-rim-is-here.html
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Support/FAQ

Postby SirHustlerEsq » May 19th, 2014, 7:12 am

Thanks, sorry to overlook something that was already out there.
SirHustlerEsq
 
Posts: 10
Joined: October 4th, 2013, 5:57 pm

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest