change the bug to 10 speed

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

change the bug to 10 speed

Postby boondog » May 2nd, 2014, 12:31 am

Hi,
my flo 30's have an 11 speed hub on, whats the best way to change that back to a 10 speed ?
Also, can I tell the difference between the 11sp and 10sp hubs when they're off ?
boondog
 
Posts: 4
Joined: June 21st, 2013, 4:37 am

Re: change the bug to 10 speed

Postby gatorsportsnut » May 2nd, 2014, 6:26 am

Your wheel should have come with a spacer already installed on the hub. Leave it in place and install your 10 speed cassette and you should be fine. That's what they told me and is what I did. Worked fine with only a few adjustments of the rear derailleur.
gatorsportsnut
 
Posts: 2
Joined: February 19th, 2014, 6:08 am

Re: change the bug to 10 speed

Postby bostonalex » May 6th, 2014, 8:48 am

Same hub, just look for a little spacer washer. 11 spd. hub with washer = 10 spd hub. Without washer = 11spd hub.
bostonalex
 
Posts: 12
Joined: May 1st, 2014, 10:55 am

Re: change the bug to 10 speed

Postby boondog » May 7th, 2014, 1:44 am

and how do you remove the hub itself ?
boondog
 
Posts: 4
Joined: June 21st, 2013, 4:37 am

Re: change the bug to 10 speed

Postby bostonalex » May 7th, 2014, 7:35 pm

boondog wrote:and how do you remove the hub itself ?


Um... You don't without removing the spokes.
bostonalex
 
Posts: 12
Joined: May 1st, 2014, 10:55 am


Return to General Discussion

Who is online

Users browsing this forum: Bing [Bot] and 1 guest