Replacing FLO 90 stickers

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Replacing FLO 90 stickers

Postby Lightning66 » April 29th, 2014, 12:22 pm

I have ordered stickers to replace the current ones on my wheels (color update). What is the best method for removal/replacement? Thanks.
Lightning66
 
Posts: 4
Joined: October 24th, 2013, 6:35 pm

Re: Replacing FLO 90 stickers

Postby Chris Thornham » April 30th, 2014, 9:22 pm

Thanks for writing. Good question. Pull the stickers off slowly and perpendicular to the wheel. If you pull too quickly a lot of residue will be left behind and you will have quite a bit of clean up to do. For any left over residue, use acetone on a rag. Be sure to use it in a well ventilated area, use it sparingly, and keep it away from where the carbon bonds with the aluminum. It takes some patience.

Please let me know if you have any additional questions.

Take care,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 581
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Replacing FLO 90 stickers

Postby Lightning66 » May 1st, 2014, 6:34 am

Chris
Thanks for the follow up. Much appreciated.
Lightning66
 
Posts: 4
Joined: October 24th, 2013, 6:35 pm

Re: Replacing FLO 90 stickers

Postby Chris Thornham » May 1st, 2014, 9:17 am

No problem!
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 581
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest