Flo 30 tubeless

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Flo 30 tubeless

Postby keiro » April 15th, 2016, 5:34 am

Hello

Has anyone tried using flo 30s with tubeless tyres?

I am trying to convert mine but can not get the tyres to seal. I have used 2 layers of the yellow stans rim tape, schwalbe tubeless valves (with extenders) and schwalbe pro one 23 tubeless tyres. I havent used any sealant yet as normally (on my mountain bikes) I pump them up first to make sure they seal before adding it

Thanks!

KEir
keiro
 
Posts: 1
Joined: April 15th, 2016, 1:04 am

Re: Flo 30 tubeless

Postby Chris Thornham » April 19th, 2016, 7:30 am

keiro wrote:Hello

Has anyone tried using flo 30s with tubeless tyres?

I am trying to convert mine but can not get the tyres to seal. I have used 2 layers of the yellow stans rim tape, schwalbe tubeless valves (with extenders) and schwalbe pro one 23 tubeless tyres. I havent used any sealant yet as normally (on my mountain bikes) I pump them up first to make sure they seal before adding it

Thanks!

KEir


Are you using a hand pump? Or a compressor? Also, you'll likely need the sealant to make it work.
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 571
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest