Recommended pump for the Flo disc wheel

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Recommended pump for the Flo disc wheel

Postby tprotpro » June 30th, 2014, 7:36 am

Hey, I was wondering what pumps people are using for the Flo disc wheels. I've seen comments that because the valve hole is larger than some other brands, that an adapter isn't needed. My current pump doesn't fit (7 year old model from Nashbar), so I was hoping for some recommendations that don't need an adapter. Thanks.

Pumping it up with CO2 cartridges will get pricey =).
tprotpro
 
Posts: 1
Joined: March 16th, 2014, 11:13 am

Re: Recommended pump for the Flo disc wheel

Postby Chris Thornham » July 1st, 2014, 3:18 pm

I'm currently using a Serfas FP-100 which they no longer make. From what I can see, the FP-200 should also work. The lever will touch the carbon, but just be careful when opening/closing the seal.

I hope that helps,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 584
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Recommended pump for the Flo disc wheel

Postby lllusion » March 17th, 2015, 8:57 pm

Do you have any recommendations for a Pump Head Adapter for the FLO disc--for my floor pump and for CO2 fill?

TIA!
lllusion
 
Posts: 7
Joined: September 26th, 2013, 1:04 pm

Re: Recommended pump for the Flo disc wheel

Postby Chris Thornham » March 20th, 2015, 8:09 am

lllusion wrote:Do you have any recommendations for a Pump Head Adapter for the FLO disc--for my floor pump and for CO2 fill?

TIA!


I like the Silca parts. They both work well. Here's a link to their site. http://silca.cc/collections/all
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 584
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Recommended pump for the Flo disc wheel

Postby Meathead » August 31st, 2015, 9:38 am

Chris Thornham wrote:I'm currently using a Serfas FP-100 which they no longer make. From what I can see, the FP-200 should also work. The lever will touch the carbon, but just be careful when opening/closing the seal.


Image
Meathead
 
Posts: 10
Joined: April 7th, 2015, 11:17 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest