Bought a disc in the last release. What do I need to know?

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Bought a disc in the last release. What do I need to know?

Postby Meathead » July 17th, 2015, 7:08 am

I bought a new disc wheel in yesterday's FLO release. Before it arrives, what do I need to know about disc wheels? Is there anything I need to know to keep it safe? What do I need to buy? I know I need a crack pipe & tape to cover the valve hole, but is there one that is better than others? Is there specific tape that I should get, or will any old sticker work?
Meathead
 
Posts: 10
Joined: April 7th, 2015, 11:17 am

Re: Bought a disc in the last release. What do I need to kno

Postby Chris Thornham » August 1st, 2015, 8:08 am

Meathead wrote:I bought a new disc wheel in yesterday's FLO release. Before it arrives, what do I need to know about disc wheels? Is there anything I need to know to keep it safe? What do I need to buy? I know I need a crack pipe & tape to cover the valve hole, but is there one that is better than others? Is there specific tape that I should get, or will any old sticker work?


Thanks for writing. I've added a link to our "How To" page that will go through all of the parts you'll need and how to get your new wheel set up. Our cut out for the valve hole is quite large so you may not need a crack pipe. I like the Silca Crack Pipe if you choose to buy one. Personally, we use clear packing tape or extra wide electrical tape. The electrical tape works well and can be easily removed.

Here's the link... http://flocycling.com/howto.php

Take care,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 567
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest