Rear FLO 60 carbon spoke length

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Rear FLO 60 carbon spoke length

Postby Raymond » July 25th, 2017, 7:25 pm

I ordered my FLO 60 carbon in February and have been rode the wheel set for five months now. Everything is as good as expected until few days ago during transportation I accidentally bent one of the spoke of the rear wheel non driver side. Bent is visible but not too bad, however I think it still should be replaced since the tension isn't the same as before.

There is a topic from few months ago had almost the same question as mine except he was asking the FLO 90. Since I can't find anything to replace the bent spoke in local bike shop, is it possible to order the spoke directly from you?

Thank you for helping.
Raymond
 
Posts: 2
Joined: July 25th, 2017, 7:05 am

Re: Rear FLO 60 carbon spoke length

Postby Chris Thornham » July 31st, 2017, 2:04 pm

Raymond wrote:I ordered my FLO 60 carbon in February and have been rode the wheel set for five months now. Everything is as good as expected until few days ago during transportation I accidentally bent one of the spoke of the rear wheel non driver side. Bent is visible but not too bad, however I think it still should be replaced since the tension isn't the same as before.

There is a topic from few months ago had almost the same question as mine except he was asking the FLO 90. Since I can't find anything to replace the bent spoke in local bike shop, is it possible to order the spoke directly from you?

Thank you for helping.


We do not stock our Carbon Clincher spokes simply because they are standard spokes. You should be able to order them from a local bike shop or from an online wheel builder like "ProWheelBuilder.com" or "Wheelbuilder.com". I will list the spoke lengths below.

FLO 60 Carbon Clincher
Front: 243mm
Standard: DS 247mm / NDS 250mm
Clydesdale: DS 253mm / NDS 258mm

I hope that helps,
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 581
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest