Speed sensor magnet for Flo Disc

FLO Product Support, FAQ, Cycling, Triathlon, Etc.

Speed sensor magnet for Flo Disc

Postby bradsony » October 6th, 2014, 9:16 am

Hi, I am running Flo 60/disc combo on my 2013 Shiv. I have a Garmin GSC 10 speed and cadence sensor and the speed reading needs to come from the rear wheel. Any thoughts on if a magnet can be glued to the rear disc or if there is an epoxy that may work?
bradsony
 
Posts: 4
Joined: October 1st, 2014, 8:02 am

Re: Speed sensor magnet for Flo Disc

Postby Chris Thornham » October 15th, 2014, 8:59 am

You might want to try a hot glue gun. Those hold really well but can be removed.
Chris Thornham
FLO Cycling: http://www.flocycling.com
FLO Blog: http://bit.ly/b3Zlpq | Twitter: http://bit.ly/bOQ08x | Facebook: http://bit.ly/d8KDhI
Chris Thornham
Site Admin
 
Posts: 564
Joined: March 2nd, 2012, 3:35 pm
Location: Las Vegas, Nevada

Re: Speed sensor magnet for Flo Disc

Postby bradsony » October 15th, 2014, 3:57 pm

Thanks. I will try that.
bradsony
 
Posts: 4
Joined: October 1st, 2014, 8:02 am

Re: Speed sensor magnet for Flo Disc

Postby Bruizer » December 20th, 2014, 2:05 pm

Perhaps you could attach a spoke magnet to the spoke just inside the opening for the valve?
Bruizer
 
Posts: 5
Joined: October 28th, 2014, 6:01 am

Re: Speed sensor magnet for Flo Disc

Postby bradsony » December 20th, 2014, 2:39 pm

Thanks. That is a good idea. I will try that and post how it turns out.
bradsony
 
Posts: 4
Joined: October 1st, 2014, 8:02 am

Re: Speed sensor magnet for Flo Disc

Postby bradsony » June 9th, 2015, 9:43 am

Bruizer wrote:Perhaps you could attach a spoke magnet to the spoke just inside the opening for the valve?

So I tried putting the magnet inside on the spoke and after 3 rides it seems to be working out. Thanks For the idea
bradsony
 
Posts: 4
Joined: October 1st, 2014, 8:02 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest